All for Joomla All for Webmasters
Head Office Karachi
Head Office Karachi
Branch Office Karachi
Branch Of Hyderabad
+92 21 4554821 Mon - Fri 09:00 - 17:00 6-D PECHS BLOCK -2 KARACHI
+92 214832900 Mon - Fri 09:00 - 17:00 C-30 Block 4/A Gulshan-e-Iqbal
+92 22 2784311 Mon - Fri 09:00 - 17:00 Ibrat press, Ghadi Khata Hyderabad
Ceritified
ISO 9001:2008
The Best
#1 in Pakistan
Number #1
Suplier in region
Get A Quote

SPCO

SPCO INTRODUCTION

We are an innovative Swiss company that manufactures top-quality water pumps world-wide in different versions. Our very wide range of pumps  can be used in many aspects of daily life.
We operate in over 60 countries around the globe within our world-wide network of dealers and distributors. Always focused on the market, we offer our clients the latest innovations in pumps. The Swiss Pump Company AG is structured in such a way that allows individual attention of the client, whilst adapting to changes on the fast-moving market.

Mission

Our target is to sell a variety of top-quality pumps at competitive prices. Customer satisfaction is our top priority. We offer the client advice in the selection and maintenance of the pump. Our world-wide network of competent service partners guarantee maximum support, regardless of time or location.

Partnering

Each client at Swiss Pump Company AG is very welcome. Regardless of whether small enterprise or large industry, we offer each customer the best possible service and help him according to his needs.
In order to improve our position on the global market, we are constantly looking for new service and distribution partners. We would look forward to calling you our partner.

About SPCO Production

Development

The Swiss Pump Company AG is renowned internationally for its different designs of water pumps. We place emphasis on good working conditions and environmentally friendly production as well as technically refined and high-tech quality products.We are continuously making our products better. For example, our latest generation of mechanical seals, which allows quick replacement of the seal at the minimum of material cost.

Selection Of Materials

The quality of the finished product depends on the quality of the raw material. This is why we choose raw material of top quality.
Fabrication

Fabrication

Another crucial factor is the manufacturing technology. We are constantly improving our procedures to make them even more efficient, thus allowing us to offer our clients high quality products for fair prices.

Quality Management

To detect possible mistakes and correct them, we avail of a quality control system during production. This entails systematic measurements of quality.

Final Inspection

In order to guarantee our customers the highest quality, each manufactured pump is tested before dispatch.

Continuous Improvement Process

The feedback from our clients is very important for the improvement of our products. We are always open to new ideas.

About SPCO Pumps

End-suction centrifugal Pumps

Non-self-priming single-stage centrifugal volute pump With axial suction port, radial discharge port and horizontal shaft componentsThe ND pumps have dimensions and nominal performances according to DIN 24 255 (10 bar) but are designed for 16 bar operation wherever the shaft seal type allows it.ND pumps according to DIN 24 256 (16 bar) are described in a separate booklet.For a pump of the same model, the performance can be changed by trimming the outer diameter of the impeller.Only four shafts are required to cover the total range, and this gives many common interchangeable parts for pumps fitted to the same shaft. Just like the shaft, the bearing house has only five sizes for the whole series.The pump has a back pull-out design, and when a suitable spacer coupling is fitted to a direct coupled unit. The casing and motor can remain in position while all other pump parts can be removed for simple and quick maintenance.ND pump sets are comprised of ND pump and standard electric motor which are connected by coupling and mounted on a steel metal base.The advantage is that we could easily select the motor and couple to the ND pump.The coupling adopts the flexible pin and bush design, which makes the pump set more stable with minimal vibration and longer life-span as compared to the ‘claw-type’ coupling.The steel metal base is joined by profiled steel bar for strength. Fitting surface where the pump and motor foots seated, are lapped by machine with high precision.The coupling guard is designed to cover the coupling to provide greater safety and security.

Horizontal Closed Coupled Pumps

CC pump series are designed and manufactured according to the European Standard DIN24255.Pump Shaft and motor shaft are close-coupled design.This way of coupling ensures the alignment of pump and motor.Pump impeller runs in good balance both dynamically and statically. therefore pump would be kept very well in operation.CCS, CCB are designed to be driven by IEC standard motor, and can be assembled separately without motor.CC Series are much shorter in length thus takes less space to install, and they also can be adjusted into different performance levels through impeller trimming.

Submersible Pumps

SPCO submersible pumps UG and UG A for deep wells starting from 4“ (DN 100) and with flow up to 280 m3/h.All essential parts, such as shaft, impellers and intermediate chambers are made of fully stainless steel AISI 304.The sealings are made of corrosion- and chemical resistant materials and the bearings consist of hard metal / ceramic combination.The light stainless steel construction allows high efficiency through which the energy consumption is drastically reduced.The cost and time for installation is lower due to the light weight of the stainless steel sheet metal pump construction.

FIELD OF APPLICATION

      Features

  • HRC 55-58 Grinder impeller.
  • Robust construction.
  • Superior heat dissipation.
  • Duble mechanical seals

(for 3HP / 5HP / 7.5HP).

       Applications

  • Waste water treatment.
  •  Sewage water

      Features

  • Recess vortex impeller
  • GAS 2” discharge
  • 2” (50mm) solid free-passage
  • 2 poles -1/2HP ~ 2HP perfect performance
  • EKK-Burgmann silicon double mech. seal
  • Stainless steel motor housing.

(for 3HP / 5HP / 7.5HP).

       Applications

  • Heavy-duty applications with soiled biological wastewater, sewage, rainwater.
  • Domestic and professional use.

      Features

  • Semi- Open Impeller
  • Non-Clogging/Wide Rang
  • Robust construction
  • Superior heat Dissipation
  • Built-in motor protection

       Applications 

  • Sewage / Waste water.
  • Strom water drainage.

      Features

  • Non-clog single channel impeller.
  • Robust construction.
  • Large solid passage.
  • Dry tip (Optional).
  • The clearance is 80 mm for free passage of the pumps.

       Applications 

  • Sewage
  • Waste water

      Features

  • Non-Clog operation.
  • Double mechanical seal.
  • Reliable shaft sealing.
  • Vortex impeller with agitator.
  • Automatic Operation (Optional).

       Applications 

  • Dredging.
  • High concentration slurry

      Features

  • Double mechanical seal.
  • Reliable shaft sealing.
  • With tungsten cutter.
  • Automatic Operation (Optional).

       Applications 

  • Hospital, school, building.
  • Wastewater treatment system.
  • Industrial wastewater.
  • Ground water drainage.

      Features

  • High abrasive resistance resin Vortex impeller
  • Double mechanical seal / Designed Agitator
  • Auto reset thermal protector / Non air locking
  • Auto version for small pit usage

       Applications 

  • Residential, commercial, industrial dewatering and site drainage.
  • Decorative waterfalls and fountains.
  • Raw water supply from lakes or rivers.
  • Sediment removal from small sumps of basins.

      Features

  • High abrasive resistance resin Vortex impeller.
  • Stainless steel outer case & strainer.
  • SST 410 motor shaft.
  • Double mechanical seal.
  • High cooling effect & long-lasting running.

       Applications 

  • Residential, Commercial.
  • Industrial dewatering and site drainage.
  • Construction sites.
  • Civil engineering projects.

      Features

  • Semi-open, Ductile impeller.
  • Double mechanical seal with sillicon carbide faces.
  • Highly efficient.
  • Built in thermal and amperage sensing.
  • Double shielded.
  • Top discharge.

       Applications 

  • Mill scale / Lime slurries.
  • Coal runoff sumps / Wash down sumps.
  • Ash transfer / Tailings ponds.
  • Slag pits / Food Wastes / Sitt removal.
  • Sand & gravel dewatering / Barge & tank cleanout.

      Features

  • High abrasive resistance resin Vortex impeller.
  • Double mechanical seal.
  • Auto reset thermal protector.
  • Compact design & Lightweight.
  • Oil free motor & SS 410 motor Shaft.

       Applications 

  • Residential, commercial, industrial dewatering and site drainage.
  • Construction sites and civil engineering projects.
  • Basement, parking lots, removing residue water (NEBR).

      Features

  • Constructed entirely in stainless steel: motor cover, motor frame, impeller…all in stainless steel.All surface materials and oil are non-toxic.
  • Heat-treated 410 stainless steel shaft.
  • Double mechanical seal lower : silicon carbide/ silicon carbide. upper : carbon/ ceramic.
  • Oil-free motor, 1 & 3 phase, with thermal and over-current protector.
  • Class F insulation, IP 68 protection motor.
  • Tethered float switch is available upon request.

       Applications 

  • Uutility, Telecommunications, Power generation plans, Drainage of construction sites & Civil engineering projects

      Features

  • Non-Clog operation.
  • Double mechanical seal.
  • Vortex impeller with agitator.
  • Large impeller clearance.
  • Minimized abrasive wear.

       Applications 

  • Medium conectration wastewater.
  • Heavy duty.